Flow Sensor

• SIP- capable without restrictions up to 150 °C / 24h
• Broad portfolio of process connections
• Flow and temperature measurement in a single sensor
• Compact and robust
• Available with IO-Link interface

• Volume and velocity measurement in one sensor
• Especially precise and stable measurements with accuracies to 0.2%
• For media with conductivity > 5 µS/cm in closed systems
• Measurement range 0 … 280 m³/h with tube diameter DN 3 … 100
• Hygienic design with 3-A and FDA conformity
• No energy loss thanks to continuous measuring tube without constriction
• Graphic display CombiView DFON optionally available and programmable via touch screen or BCP software

• Paddlewheel-type flow sensor in a compact housing. This sensor works on faraday’s law of electromagnetic induction. It generates a frequency & signal proportional to the flow. The sensor gives excellent and reliable results in the flow velocity range of 0.5 m/sec to 5 m/sec & for the flow with Reynolds no greater than 5000.

• Paddlewheel-type flow sensor in a compact housing. This sensor works on faraday’s law of electromagnetic induction. It generates a frequency & signal proportional to the flow. The sensor gives excellent and reliable results in the flow velocity range of 0.5 m/sec to 5 m/sec & for the flow with Reynolds no greater than 5000.

• Electromagnetic flow meters, or magmeters, are comprised of a transmitter and sensor that together measure flow. The magnetic flow meter’s sensor is placed inline and measures an induced voltage generated by the fluid as it flows through a pipe.
• Application:
  • ETP/STP Plant
  • Bore Well Water
  • Water Base Chemical Mixing Plant
  • Water Bathing Plant
  • Ro Plant
  • Starch Slurry
  • Food Mixing Plant
  • Pumping Station

Vortex Flowmeter bases on Karman vortex street Principal for detection and metering the liquid, gas and steam. It is widely used in Petroleum, chemical, metallurgy, heat supply

industry, etc.

for steam and gas application available with pressure and temperature compensating,

1) Technical Specification : 

Process media : Gas, liquid, air, steam, vapor

Enclosure                   : 1Cr18Ni9Ti  

Accuracy                    : +/-  0.5  for liquied,

                                    : 1% for gas and steam

Repeatability              : 0.2%    

Flow range: Liquid:0.4-7.0m/s;

                  :Gas:4.0-60.0m/s;

                  :Steam:5.0-70.0m/s                                                                                                          

Maximum working pressure: 6 MPa                                             

Fluid &Ambient temperature: -40 to 350 Deg. C

Connection: Thread (M/F) or flange 

2) DISPLAY

Power voltage: 3.3 V10AH lithium batteries can be used more than 5 years in a row. OR 24 v dc

display mode:

Liquid Crystal Display (LCD), as follows:

     L XXX. X    four instantaneous flow (m3 / h) or L/h

    XX. XXXXXX eight cumulative flow (m3)  or L

Pressure, temperature reading

Cumulative flow: automatically expand the display precision, the cumulative flow values can be reset.

Power-fail protection: instrument coefficient, the Total flow values ten years is not lost when power supply drop.

3) output : 3 wire pulse

                  : 2 wire 4 to 20 mA

                  : RS-485

                  : HART