Nu Icon Private Limited
Bengaluru, Karnataka
GST No. 29AAHCN4401G2ZK
07942833061 80% Response Rate
Send E-mail
- Home
- »
- Our Products
- »
- Level Sensor
| Minimum Order Quantity | 1 Piece |
| Type | Level Sensor |
| Operating temperature | -40 - 85 DEG |
| Measurement type | Contact with medium |
| Detection of non-conductive media | NO |
| Fill level detection through container | NO |
| Liquids in direct contact | YES |
| Special type | Liquid level sensor for oil |
| Mounting type | Non-flush |
| Minimum Order Quantity | 1 Piece |
| Model Name/Number | EE360 |
| Usage/Application | Industrial |
| Common Mode Voltage | 8 - 35 V DC 12 - 30 V AC |
| Measuring Rate | 0...1 aw / 0...100000 ppm |
| Protection Class | IP65 / NEMA 4 |
| Minimum Order Quantity | 1 Piece |
| Material | Stainless Steel |
| Mounting Options | Top Mount |
| Media Type | Liquid |
| Output type | PNP, NPN, Digital (push-pull), 4-20 mA |
| Trigger modes | Adaptive trigger, Window trigger, Analog output |
| Switching logic | Normally open (NO), Normally closed (NC), Active high, Active low |
| Measuring principle | CleverLevel level switches (Frequency Sweep) |
| Wetted parts material | PEEK Natura, AISI 316L (1.4404) |
*Your information is safe with us.
| Minimum Order Quantity | 1 Piece |
| Material | Stainless Steel |
| Type | Level Sensor |
| Mounting Options | Top Mount |
| Output type | PNP, NPN, Digital (push-pull) |
| Measuring principle | CleverLevel level switches (Frequency Sweep) |
| Wetted parts material | PEEK Natura, AISI 316L (1.4404) EPDM, optional |
| Switching logic | Normally open (NO), Normally closed (NC), Active high, Active low |
| Minimum Order Quantity | 1 Piece |
| Material | Stainless Steel |
| Mounting Options | Top Mount |
| Media Type | Liquid |
| Cable Length | 2 meter |
| Working Pressure | 12 bar |
| Operating Temperature | 125 deg |
| Switch | SPDT Reed FORM 'C' with 50VA contact rating |
| Material Type | 316 stainless steel stem, float, test mechanism, body plates and slosh shield |
| Ingress Protection | IP-68 |
| Country of Origin | Made in India |
Bilge level switches are safety critical component for the detection of liquid in dead spaces, voids and sumps that are rarely visited or inspected by the crew. The switch is also designed with a manual lift test mechanism, which can be used to check switch operation.
| Minimum Order Quantity | 1 Piece |
| Material | Stainless Steel |
| Mounting Options | Top Mount |
| Media Type | Liquid |
| Working Pressure | 20 bar |
| Operating Temperature | 70 deg PVC insulation or 150 deg PTFE insulation |
| Probe Length | 10 meter |
| Electrode Material | SS304 or SS316 |
| Country of Origin | Made in India |
It is a simple, low cost, point level controller designed for detection of conductive liquids, having low densities, high viscosities, containing solid particles and interface between nonconductive and conductive liquids.
It comprises of a probe, wired to a level controller. The probe holds one common reference/common electrode and one or multiple “Control Electrodes” depending upon the number of levels to be controlled. All the electrodes are suitably insulated to avoid electrical bridging. The lengths of “Control Electrodes” correspond to the height of preset level points to be controlled and the length of the “referenc/common Electrode” is kept slightly longer than the longest “Control Electrode”. If tank is conductive, it can be used as a reference/common electrode. Then number of control electrodes equals number of preset levels. Level controller houses sensing electronics consisting of power supply and signal conditioning circuit which provide a “Low AC Voltage” across mass and control electrodes. On liquid reaching preset level point electrical circuit gets completed
- generating a signal which is amplified to actuate a relay, those potential free contacts are available for subsequent operations. On “Level Falling” the circuit breaks, deactivating the relay.
*Your information is safe with us.
| Material | Stainless Steel |
| Product Type | Sensor |
| Usage | Detecting Range Depth |
| Current | 24V DC |
| Dimension | 4.13"X1.10"[LXB] |
| Item Weight | 0.28 g |
| Minimum Order Quantity | 1 Piece |
| Current Rating | 5A |
| Material | Stainless Steel |
| Mounting Options | Side Mount |
| Media Type | Liquid |
| Working Pressure | 50 bar |
| Minimum Order Quantity | 1 Piece |
| Current Rating | 0.5A |
| Material | Plastic |
| Mounting Type | Top Mount |
| Temperature | 70 deg |
| Pressure | 2 bar |
MINI VERTICAL MOUNTING MAGNETIC FLOAT SWITCHES are installed vertically and can be side mounted through an elbow. They provide actuation at high, low or intermediate liquid levels. The switch actions can be reversed from N/O to N/C & vice versa by simply changing the float direction.
*Your information is safe with us.
| Minimum Order Quantity | 1 Piece |
| Material | Stainless Steel |
| Current Rating | 3A |
| Mounting Type | Vertical Mount |
| Temperature | 150 deg |
| Enclosure | Cast Al., Weather-proof to IP 67, Ex-proof IP 66 to Gr. IIA, IIB & Gr.IIC, DIN Polyamide connector |
| Guided Stem MOC | SS316 or SS304 or Brass or SS316Lor PP |
| Country of Origin | Made in India |
Vertical Float Switches are established and reliable technique in industry for single / multiple liquid level sensing and control in open or pressurized vessels. It offers trouble free service in conductive /
non-conductive liquids under widely varying temperatures, pressures, liquid viscosity and corrosive conditions. Besides, it provides high repeatability and effects of shocks / vibrations are minimal.
Vertical mounting type float switches operate on below principle.
• Use of magnetic Reed switch as sensing element. A float encircling a fixed stationary stem is equipped with powerful permanent magnets. As the float rises or lowers with liquid level the magnetic field generated by the magnet that is present within the float actuates a hermetically sealed reed switch mounted inside the stem. This in turn makes or breaks the contact of the reed switch.
| Minimum Order Quantity | 1 Piece |
| Usage/Application | Water, oil, kerosene |
| Material | Stainless Steel |
| Ambient Temperature | -40 - +85 DegreeC |
| Measuring Range | 100m |
| Communication Protocol | 4-20mA |
| Country of Origin | Made in India |
| Minimum Order Quantity | 1 Piece |
| Usage/Application | Process Industries |
| Material | Stainless Steel |
| Ambient Temperature | -40 to 200 DegreeC |
| Measuring Range | 40 bar |
| Process Connection | Flanged 2", 3", 4", 6" Class 150 |
*Your information is safe with us.
| Minimum Order Quantity | 1 Piece |
| Type | Rigid |
| Usage/Application | oil and gas, food, pharmaceutical and general industries |
| Material | Stainless Steel |
| Ambient Temperature | -196 to 450 DegreeC |
| Measuring Range | 75 m |
| Communication Protocol | 4 to 20 mA/HART, PROFIBUS, Modbus, and FOUNDATION Fieldbus |
| Minimum Order Quantity | 1 Piece |
| Usage/Application | Water/wastewater chemical storage vessels, small bulk hoppers, filter beds, liquid storage vessels |
| Accuracy | Water/wastewater chemical storage vessels, small bulk hoppers, filter beds, liquid storage vessels |
| Operating Range | 12 m |
| Output Type | 4 to 20 mA/HART |
| Ambient Temperature | -40 to 85 DegreeC |
| Minimum Order Quantity | 1 Piece |
| Type | Flexible |
| Usage/Application | Process Industries |
| Material | Stainless Steel |
| Ambient Temperature | -40 to 200 DegreeC |
| Measuring Range | Rod: 5.5 m (18 ft), Cable: 25 m (82 ft) |
| Communication Protocol | 2-wire (4 to 20 mA) current loop design |
*Your information is safe with us.
| Minimum Order Quantity | 1 Piece |
| Type | Rigid |
| Packaging Type | 10 bar |
| Usage/Application | Oil, Water |
| Material | Stainless Steel |
| Ambient Temperature | 120 deg |
| Measuring Range | 4000mm |
Level Transmitters are simple and reliable sensor for continuous level indication and control of any liquid, chemically compatible with the (sensor) material, unaffected by electrical conductivity, temperature, pressure or viscosity. The float is designed for variety of liquids and its unique self-cleaning construction is well suited for even sticky or dirty environments with no float hang-ups.
| Minimum Order Quantity | 1 Piece |
| Material | Stainless Steel |
| Mounting Options | Top Mount |
| Media Type | Liquid |
| Measuring Range | 40 mm to 4000 mm |
| Working Pressure | -1 to 160 bar |
| Operating Temperature | -196 to 450 DegreeC |
| Minimum Order Quantity | 1 Piece |
| Material | Stainless Steel |
| Mounting Options | Top Mount |
| Media Type | Liquid |
| Measuring Range | up to 30 m |
| Working Pressure | up to 10 bar |
| Operating Temperature | -40 to 125 DegreeC |
*Your information is safe with us.
| Minimum Order Quantity | 1 Piece |
| Material | Stainless Steel |
| Mounting Options | Top Mount |
| Media Type | Liquid |
| Working Pressure | 40 bar |
| Level Height | 500 mm -15000 mm |
| Country of Origin | Made in India |
Displacer type level switches offers the industrial user a wide choice of alarm and control configuration. DLS works on a simple buoyancy principle and is well suited for simple or complex applications, such as forming surging liquids or agitated fluids, and usually costs less than other types of level switches.
| Minimum Order Quantity | 1 Piece |
| Material | Plastic |
| Mounting Options | Top Mount |
| Mounting Type | Top Mount |
| Media Type | Liquid |
| Temperature | 50 |
| Working Pressure | 1 bar |
| Minimum Order Quantity | 1 Piece |
| Usage/Application | Petrochemical, Oil and Gas industry |
| Material | Stainless Steel |
| Ambient Temperature | 90 deg |
| Measuring Range | 4500mm |
This high-precision and robust level transmitter is designed to provide continuous gauging of liquid media levels in tanks. The measuring principle used by the magnetic float level transmitter exploits the physical effect of magnetostriction and is largely unaffected by temperature. Magnetostriction is particularly ideal where level measurements are required to be extremely accurate, e.g. in the Petrochemical / Oil and Gas industry. The level sensor outputs measuring signals in the range of 4-20mA. Available in lengths 200-4000mm, it is compatible with a variety of tank dimensions.
It also comes in the following versions: The explosion-proof version of the level sensor can be installed in potentially explosive atmospheres in which electrical equipment of category 1 (zone 0) or category 1/2 (zone 0/1) are required. Operating on the digital HART protocol, the HART level sensor is able to output the position of the first, second or both floats.
*Your information is safe with us.
| Minimum Order Quantity | 1 Piece |
| Measurement Range | -2000 to +2000mV |
| Input Sensor | ORP |
| Usage/Application | Industrial |
| Accuracy | +/- 1 digit Of F.S |
| Country of Origin | Made in India |
| Single Range | -2000 to +2000mVs |
| Resolution | 1mVs |
| Accuracy | +/- 1 digit Of F.S |
| Dual Display | Upper For ORP (Red LED) & Lower for Control Setting (Red LED) |
| Calibration | Single point manual Calibration |
| Calibration Slop | +/- 30% Of Display Reading |
| Current O/P | 4-20mA D.C, fully isolated ( Optional At Extra Cost ) |
| Relay O/P | One Changeover Relay potential free Contact of 5 Amp |
| Control Setting | Two Set Point with High & Low Value Setting |
| Controlling Output | One Changeover Relay of Potential Free Contacts Of 5Amp |
| Power Requirement | 230V A.C +/-10%, 50Hz single phase |
| Environment | 5 to 50c. |
| Dimension & Weight | 96 x 96 x 65mm ( Grey ABS Cabinet ), 400grams for Inst. Only (Approx) |
| Switch Type | SPDT |
| Usage/Application | Industrial |
| Mounting Options | Top Mount |
| Operating Temperature | -20 to 70 deg |
| Media Type | Dry Material |
| Country of Origin | Made in India |
Airtight sealing device, outdoor application is available.
• Unique sealing ring design prevents dust ingress to housing along the shaft.
• The torque force is adjustable.
• The performance of torsion is stable and reliable.
• If the rotary paddle bears an extra overload, the motor will be appeared slide to prevent the inside mechanism being damaged.
• It is rationally designed, the inside mechanisms can be easily torn down for mainte nance and replacement while still on the silo.